Touch-ups Or Trade Damage

Touch-ups or Trade Damage in New Construction?

Being a new construction residential painter requires advance planning, patience and quite frankly a very thick skin. Finishing a new home is all about teamwork and being able to see the big picture. Builders and general contractors go through a lot of painters and other trades until they are comfortable with the ones they have. The contractors that succeed in new or renovated homes are a different breed of contractors.

To be as productive as possible, a new construction painter can go in right after all surfaces are ready and before any other finish trades come in. In this perfect and uninterrupted scenario, the painting is done efficiently and well. The other trades, deliveries and installers come in, do their thing, being careful not to damage the painted surfaces. But perfect is impossible here. Trades will be late, workers will be in a hurry and there will be damage to the surfaces. Repainting surfaces again after damage is unfortunate but frequently expected from our trade. So what to do?

Communication with the General Contractor.

The general contractor or their project manager expect a certain amount of touch up work at the end of a project. What they don’t like is the never ending change orders presented to them for approval and that’s understandable. To avoid that situation, communicate with them about how you prefer to deal with it. Some painting contractors factor in a few hours in their price as an allowance for this. Anything over that allowance they charge as Time & Materials work. After gaining some familiarity with how a contractor and their trades work, that can be a workable arrangement.

When working with a new contractor it is important to communicate with them what is considered damage and what is considered touch-ups. There might be something missed or some workmanship deficiencies by the painter. This is what we call touch-ups and we are 100% responsible for our work. The owner or general contractor should not have to pay for that.

What about damage to painted surfaces by other trades?

If we damage a completed area we are responsible. When someone else damages our painted areas we consider that to be damage. We are happy to fix it and we always do, but this is work that needs to be billed. This does not make a painter look bad, it’s just business. Mistakes happen and we all work together. We often fix and correct small things and nobody knows about it. It’s the right thing to do for the right customer and we don’t miss the big picture. Unfortunately sometimes we have to paint finished surfaces again. This is a common issue and the PDCA (Painting and Decorating Contractors of America) explains it well in the industry standards.

“2.1. This standard defines the repair and repainting of finished painted surfaces that have been damaged by individuals other than those employed by the painting and decorating contractor. This type of damage is defined as “damage caused by others.” Damage caused by others will be corrected by the painting and decorating contractor after a change order is received from the contracting entity. The painting and decorating contractor will repair and/or repaint the damaged area after receiving acceptance of its proposal and authorization to proceed on either a lump sum or time and material basis.”

How to Prevent Damage to Painted Walls.

Being proactive when communicating with the customer and general contractor means being responsible. Ecopainting has a preferred way of painting in new construction. It’s efficient and lets other trades do their job better. Deadlines and scheduling of trades can make this difficult, but when it works, things turn out much smoother. We find most general contractors are open to this and it saves additional costs to the customer.

Right after installation, all drywall is primed and ceilings are painted. Trim and doors are prepped and painted. Then we apply the first finish coat on all walls. If possible most cutting of the final coat should be completed as well. After most of the other trades leave we can roll the final coats of paint. If there is any minor damage, we can easily patch and spot prime it before the final coat.

Communication and being upfront goes a long way toward the successful completion of a project. The homeowner wants a predictable, cost effective and pleasant renovation experience. The general contractor wants to deliver that experience and of course be profitable doing it. The painters are just one piece of the puzzle, yet without them the puzzle is incomplete.

Ecopainting has worked with homeowners and a select few contractors in the renovation and building sector. We work throughout the Greater Toronto Area and have provided service for our residential customers for over twenty years.
Call us at (416)733-77567 to discuss your future painting needs.

Touch-ups Or Trade Damage posted first on your-t1-blog-url

Painting Facilities FAQ

Painting Facilities FAQ posted first on your-t1-blog-url

Protecting The Paint

Protecting the New Paint in your Facility.

How do you protect the fresh new paint and keep your facility looking good for years? The painters came and went. The paint job looks good, everything turned out perfect! Is there a way to extend the life of the paint and save on future facility painting costs? You can have the painters come in periodically and touch up in the high traffic areas. Some Commercial Painters offer maintenance services to their customers. Ecopainting offers this and we think it’s a good idea. Is there a way to reduce service visits even further and save more money for your facility?

Wall and Paint Protection Solutions.

Plan for this right after your painters leave and as soon as the paint is cured. Walls will get damaged by furniture moving and deliveries, utility carts, chairs even cleaning equipment. Corners, doors and frames see most of the wear and tear, especially in narrow hallways.

In care facilities, wheelchairs, medical equipment and stretchers take a toll on the walls. Boardroom and classroom walls mostly get damaged by chairs and tables. Modern paint is formulated to be tough and dry as fast as possible. Yet it has no chance of withstanding the abuse it is exposed to in some busy facilities.
You can protect the walls by placing small furniture and plants in front of them. Unfortunately, when floor space is at a premium this is not an option. Let’s not worry, protective help is available. There is an entire industry catering to facility managers with protective products made for almost every surface.

Protecting Corners.

Unless your office has an open space design or unique round room architecture, you have corners. Most commercial facilities have outside corners and they need to be protected. Employees work hard, move fast and are consumed with their activities. You can’t blame them if wall protection is not top of mind. You can keep repairing and painting or you can install corner guards. They come in many varieties including clear or coloured acrylic that works very well with office decor. Ecopainting can install these corner guards as part of our paint project. The most requested corner guards we installed are stainless steel. They come in different sizes and can look attractive as not to compromise the office decor. One vendor we use and recommend is Boss Steel located in Richmond Hill. They have standard sizes but if you give them enough time they will cut the product to your custom specifications.

Protecting the Boardroom Walls.

In a classroom and boardroom there are many chairs and tables. Depending on the presentation and the participants, chairs and tables are always moving. One of the most common repairs we do in a boardroom is patch the drywall two or three feet off the floor. Installing chair rail is a good solution to this problem. It protects the wall from chairs and tables and it doesn’t have to look ugly. A carpenter can install decorative wood chair rail that can be varnished or coated with a strong enamel. The stronger enamel finish offers some protection but it’s not indestructible. There are vinyl flat wall protectors available that provide more protection than wood chair rail. They come in different decorative colours including some clear low profile ones. The flat wall strips are great for hallways in  healthcare facilities, schools, universities & child care facilities.

For best results, chair rail should be installed at about 28-32 inches off the floor.

Protecting the Paint of Door and Door frames.

We paint doors and door frames with glossier and tougher paints for a reason. Some of us have a tendency to kick a door open, especially when our hands are full. Door frames are narrow  passage ways and we carry and wheel objects that damage the paint. Doors are expensive to replace or to paint every year. Investing some money to protect them is good economy. Ask your contractor about installing kick plates, push plates and edge guards. There are different choices for different facilities. There are metal kick plates common for front doors in homes and retail stores. Stainless steel guards and push plates offer the best protection for very busy commercial doors.

Diamond plate metal protectors offer great protection for warehouses and automotive shops and can even lend a contemporary look in a nightclub.

Ecopainting is a painting contractor servicing the needs of Facility managers in the Greater Toronto Area. We realize that budgets for painting are not bottomless. We work with our clients to find long term manageable solutions. By protecting your new paint job you extend it’s life cycle. We can source products for your maintenance staff and sometimes we can install them.

Protecting The Paint posted first on your-t1-blog-url

Ultra Spec 500 Review

Ultra Spec® 500 Review — The Perfect Paint for Facility Services?

Is Ultraspec 500 the perfect paint for facility services and maintenance painting?
Benjamin Moore first introduced the Gennex waterborne Colorant system for their top line paints. Aura and Natura paints benefited immensely from this new technology. Contractors were hoping that the Gennex technology would trickle down to many more Benjamin Moore paints. When Ultraspec 500 was introduced as a commercial line with the Gennex system, the commercial painting community welcomed it. This was to be a paint made specifically for us. It was also inexpensive, good quality and had zero VOC in all colours.

Benjamin Moore says “ Zero-VOC Ultra Spec 500 is a professional-quality interior coating designed to meet the needs of professional painting contractors, facility managers, and property managers. Professionals will appreciate its excellent hiding and touchup properties, good flow and leveling, easy application, and soap-and-water cleanup.”

The Review of Ultra Spec 500.

It’s been a few years since it was introduced, why review Ultraspec 500 now? We used thousands of gallons of this product, so why not share our experiences with it. This is still our “go to” interior commercial paint. We use it for offices, medical and care facilities, schools and other institutions. 

Quick Drying Time and Recoat.

When a paint dries fast, the painters can apply multiple coats of paint in the same day. This feature alone opened many scheduling opportunities for us. Occupied spaces don’t have to be painted at night or during the weekend. Like most employees, painters prefer not to work weekends and evenings. Facility managers don’t have to arrange night and weekend access and security clearance. Rooms and areas can be prepared, coated and put back in service in the same day. When heavy furniture is moved away from walls, these walls can be painted twice within 2-4 hours. Less furniture moving results in lower expenses to the customer and of course less work for the painters.

Durability of the Paint.

Ultra Spec 500 uses patent pending cross-linking resin technology that strengthens the dry paint film and significantly extends the life of the coating. As a result, Ultra Spec 500 is more washable than most comparable commercial coatings.

It is available in a wide range of convenient sheen levels. There is a low sheen version of eggshell which makes for a more durable alternative of a flat finish. The low sheen still compensates  for less than ideal surface conditions. When the walls are in better condition, their eggshell with it’s higher sheen will provide a very durable coating.

In washrooms and utility rooms where the eggshell is not durable enough, the semi-gloss can be used. The semi-gloss has a softer than usual sheen for a semi-gloss paint. Along with the shinier eggshell the semi compensates for the lack of Pearl or Satin sheens.
The semigloss sheen is sufficient for most doors and woodwork. If additional durability is needed there is a Gloss sheen available.

Ultra Spec 500 Hiding Properties.

The ability of dried paint film to conceal (hide) the previous colour is called hiding. Good hiding can be determined mainly by the thickness of the paint film we are able to apply. Different paints contain varying grades and quality of resins in them. Volume solids is the volume of paint after it has dried. The percentage of solids content per volume is a primary factor of how well a paint film hides the previous colour.

Ultraspec 500 lists Volume Solids of 42 ± 2% in their technical data sheet (eggshell). This is a very high percentage for any paint, especially a commercial line.

This accurately matches our own experience when usint this paint. Two coats are sufficient for most colours with the exception of some  bright whites (OC-65 Chantilly Lace comes to mind). Hiding red with two coats works most of the time when a gray primes is used. Certain reds, oranges and yellows will require a third coat. While multiple coats for red is expected with most paints, Benjamin Moore spoiled us with Aura’s performance. To be fair, Aura costs twice as much as Ultraspec 500.

The Flat is not 100% dead flat. Because of it’s good hiding qualities painters use it for new construction and for real estate purposes. As expected, the flat sheen is not at all washable and we don’t recommend it where washing is expected. We use a lot of the flat as a ceiling paint because it dries fast and often allows a second coat within one hour. When painting a ceiling in a room with large windows Ultraspec 500 may not be the right paint. A dead flat is a better choice for these ceilings.

In Conclusion.

Ultraspec is a very good line of paint for facility managers. It features Zero VOC, good hiding and durability and quick drying. The relatively low price and availability makes it a popular choice for painting contractors as well.

Ecopainting is an experienced painting contractor in the Greater Toronto Area. We have painted for many facility managers and will be happy to discuss your facility paint requirements.

Ultra Spec 500 Review posted first on your-t1-blog-url

Removing Wallpaper Prep

Preparing to Remove Wallpaper.

Wallpaper removal is possibly the single, most unpleasant task that house painters can undertake. It is certainly a messy job, involving slimy glue residue, wet drop-cloths and garbage bags full of the stuff. What probably scares us the most is the unpredictability of the job. Very often we don’t know the age of the wallpaper. There are times that the surface was not prepared well by the installers. You can certainly test a little corner but that is not necessarily indicative of how easy the wallpaper removal will be. Painting contractors will sometimes suggest to the customer a time & materials arrangement. This will go a long way in taking care of any difficulties and protect the contractor from any surprises.   

Unfortunately some homeowners do not like paying based on time & materials. To some this has the same connotation as writing a blank cheque to a stranger. The customer will sometimes try removing wallpaper themselves to save money. It is difficult but certainly possible for a homeowner to do this. All it takes is some research, hard work and basic tools.

Find out what Kind of Wall is Behind the Wallpaper.

Is it drywall or plaster? Older homes have plaster walls, newer ones have drywall. If you are not sure, you can guess what they are by gently knocking on them. If you knock on the wall and it sounds and feels solid you very likely have plaster walls. If it sounds hollow, you likely have drywall.

Plaster walls are stronger and if they are in good condition, they will not be damaged. The possible drawback of working with plaster walls is their age. First, a safety concern: if the walls are very old, there may be asbestos in them. This work is very hazardous and better left for specialty professionals. In some homes it is possible to have multiple layers of wallpaper installed over each other. Our Toronto painters found that to be the case in older downtown neighbourhoods.

Drywall provides a more delicate surface to work with and you need to take care not to damage it. Many times an enthusiastic customer will remove the wallpaper for us, only to find out that the walls were severely damaged in the process. This happens more when the installer did not prime the walls properly before the installation. Repairing the damaged walls costs a lot of money. Sometimes considerably more than the money saved by “helping” with the removal.

Quick tips: do not use a steamer on drywall, and use putty knives with rounded corners.

Basic Tools for Wallpaper Removal.

A Stepladder. You need one to reach the ceiling comfortably as most of the work will be done on the ladder. A stepladder with a tool tray is especially helpful as it allows you to use both of your hands.

Plastic drop-cloths. You will need a lot of plastic to protect your furniture and to capture some of the water with the glue residue. You will need a lot of it, so you might find it more economical to purchase a big roll.

Painters drop cloths or anything you can find to catch a lot of water. You need a lot of water for this project and you will want to capture most of it. If you don’t you will damage your floors or even the ceiling of the lower floor. In the absence of painter’s drop cloths, old blankets, sheets and towels will do the job.

Wallpaper removal solution. Some homemade solutions are water softeners, dishwashing liquid with water, or plain hot water. All of them can work when the wallpaper is easy to remove. If you want to make your life easier we suggest one of the commercially available products. They come premixed, concentrated or “gelled”. In our experience most of the work well if you follow the directions on the container. Ecopainting uses a solution we special order from the US. It is less harmful and is quite effective.   

Bucket and a sponge to apply the solution to the wall. Alternatively you can apply the solution to the wall with a tray and a paint roller.

If there is a lot of wallpaper to remove, using a garden sprayer with a pump will make the job go faster.

A “paper tiger” or coarse sandpaper. Sometimes the top layer is waterproof vinyl that is difficult to remove. By using these tools you can score the vinyl surface to allow the solution to penetrate and reach the glue. Be careful not to damage the walls under the wallpaper. Drywall gas a delicate, paper thin surface, especially when it gets wet with hot water.

A wallpaper steamer. This was a popular tool when most of the walls were made of plaster. A steamer applies hot steam quickly to the surface and helps dissolve the glue. I would not recommend a steamer for drywall surfaces. It will damage the walls and create extensive and expensive wall repairs and plastering.  

Strong garbage bags to collect the old wallpaper, and used plastic.

Putty knife or scrapers. To remove the paper and scrape the old paste off the wall. Round the corners of the scrapers to avoid damaging the surface. There is a specialty sharp blade made specifically for wallpaper removal. We find the blade to be too sharp for most of the jobs, except for hard and smooth plaster walls.

Removing wallpaper is a lot of work but a little preparation and good tools, can make the job easier. If you need help, this service is part of our interior painting services.

Removing Wallpaper Prep posted first on your-t1-blog-url

Careers In Painting

Becoming a Professional Painter.

Why would anybody want to become a painter? Why should young men or women even consider employment in the trades? These are both valid questions stemming from incorrect assumptions that young people have about the trades. Let’s examine why being a painter or working in trades is a great career choice based on some undisputable facts.

• Unemployment rates of University and College graduates are high,
• Many graduates that are working, have jobs not related to their field of study.
• Almost every student graduating is burdened with thousands of dollars worth of student loans. This is not an ideal way for young men or women to start their working life.

Learning a trade does not mean that you don’t have what it takes to complete College or University. You can be intelligent and still choose to make your living with your hands. In fact, more and more young men and women end up working in trades after getting another degree. We see this in our company all the time. Our average painter or job manager has some College or University education.

What Does a Painter Do?

Painters prepare surfaces and apply coatings mostly for protective and decorative purposes.

These surfaces can be wood, drywall, plaster, concrete, steel etc. Interior surfaces are inside commercial or residential buildings such as homes, offices, factories, institutions and other facilities. Exteriors of homes, buildings and other structures are mainly painted to protect them from the weather elements. Coatings come in many colours and can also be used to decorate and beautify.

There are other trades and skills that painters can learn to diversify their expertise and skill level. There is demand for wallcovering specialists, decorative and faux finishers, epoxy floor installers. Plaster and drywall finishers work hand in hand with painters in new construction.

How Does someone Become a Painter?

Some painters learn their skills working for companies mostly under the wing of more experienced painters. It takes a painter at least 2 or 3 years to acquire most of the relevant and useful skills a company uses. It’s a good idea to ask a contractor you want to work for if they have a training program. At Ecopainting we often hire young men and women with very little experience. It’s not unusual for a trainee of Ecopainting to be running our job sites in less than three years. We use our own training systems that focus on training mostly for the things we do every day. Safety training and the required certification is a part of our training program.
A young person considering his or her options, can register for a fully accredited apprenticeship program. This start with a pre-apprenticeship course and lasts three of four years. Our company encourages this training as it is very thorough and includes both field and classroom training. A successful completion will culminate with a “Red Seal”  journeyperson ticket in painting and decorating. Career options within the trade include becoming a painter, crew leader, operations manager, even an estimator.

Starting a painting business. After learning the different facets of the trade, some painters decide to become independent contractors. Starting your own business is always better when you are familiar with the inner workings of the industry. A field painter will learn customer relations, production systems, and master the efficient application of coatings.

Running a successful and profitable business can be a good career choice for painters. Keep in mind that a good technician is not necessarily a good business operator. Running a business requires financial knowledge, marketing and many other business skills. A good painter with sufficient business education has a good chance of running a successful business.

What Are the Benefits of Being a Professional Painter?

Cost savings considerations.

It is always cheaper to learn to be a painter than earn a university or College degree. Whether through an accredited apprenticeship or learning on the job, you don’t have to spend thousands of dollars to buy a career. When you are ready to join the workforce full time, you don’t have student loans to deal with.

Good prospects as a Professional Painter.

Every structure and every home will be painted at some point, then painted over and over again. No new building project is complete without the final contribution from the finish trades. While most other trades are important contributors, painters will be forever painting and maintaining the same structure. Then there is the job security factor. Trade jobs cannot be outsourced and the bulk of the work must be produced on site. Some products are hitting the market prefinished with “lifetime” coatings but painters need not to worry. These products are limited and so is their popularity.

Financial Compensation.

The earning potential of trades rivals and often exceeds the earnings of most other occupations. It addition to regular pay, some in the industry receive commissions, bonuses and incentives tied to production. This is the norm for crew leaders, operation managers and estimators. Today most of the trades offer good income and benefits. Considering the skill shortages predicted in the future, trades will be in demand and compensation will certainly increase. An experienced painter working for a good company will get paid well. Full time commercial estimators and experienced project managers are in demand already and can make a good living. The sky is the limit of course for the business painter with business training. Even though the market is competitive, running a painting business can be rewarding and profitable.

In conclusion, becoming a professional painter is a viable career with many unique rewards. Our company hires and trains young people from time to time. We encourage you to approach us with any general os specific questions about becoming a painter. Your next career could be just a phone call away.

Careers In Painting posted first on your-t1-blog-url

Educational Facility

Educational Facility Painting – Centennial College.

Educational Facility posted first on your-t1-blog-url

Colour For Tall Walls

The Challenge of Picking Colour for Tall Walls.

If the walls of your home are very tall it can make rooms appear cavernous or too large to be comfortable in. Strategic use of colour can make your walls seem shorter, bringing them into better scale with the rest of your furnishings. Colour consultants and designers earn their keep by solving these space problems. The right colour can be as obvious as a white or as complicated as a two tone solution.  

Why Scale Down Walls

High ceilings can be an attractive feature in many homes, while low ceilings can have an almost claustrophobic effect on the same room. So why bring a tall ceiling down into scale?

Tall ceilings work best with certain decorating styles, such as contemporary. They work less well with country or cottage styles, where you want to inspire a comfortable feeling in a space. In those rooms, a very tall ceiling actually undermines your decorating style, undoing the look that you’re after.

House painters will use tall ladders or scaffolding to reach these high walls. Creative thought should be exercised to better take advantage of this difficult work. Major walls in a home don’t usually get painted often after-all. Paint, combined with wall paneling, chair rails, or other elements can help to visually bring a wall down in size, matching it to its surroundings.

How to Scale Down Tall Walls Using Paint

There are a few different ways you can use paint to help scale down a tall wall. Some of these methods can be combined with others to create unique looks that detract from the wall’s height.

Warm colour on Hallway walls

Warm Colour Tones

Colour plays a big part in how something is perceived. Warm colours like yellow, tan, or red visually contract when we look at them. This makes something appear to be closer than it really is. Cool colours visually recede, which makes them look further away. While a cool, crisp white might be your preferred wall colour, trading it for a warmer ivory can instantly make your walls appear smaller than they are.

Two-Colour Wall

Using two colours on the same wall can be an attractive way to break up the height and bring it down in size. Pick two shades of one colour. This can be a warm tan and a rich chocolate brown, for example.

Paint the lower half of the wall the darker shade, and the upper portion of the wall the lighter shade. Divide the two colours with a neutral-toned molding through the middle. Depending upon the height of the wall, you can make this dividing strip at any height; think about placing it at a shoulder or even eye level, rather than the traditional chair rail height to truly bring a wall down in size.

Adding Texture

Texture can help further bring the wall down in scale. When you combine warm colours with texture, you really help make the wall seem cozier and more in keeping with its surroundings. A few ways to do this include:

• Putting up beadboard or another type of wall panel on the lower half of the wall, and painting it your darker colour. Use a solid, light colour on top with no texture to break up the wall.
• Using a dark colour on the bottom of the wall, but instead of using a single colour of paint up above, consider painting vertical stripes or using wallpaper to help add interest.
• Faux-painting the wall to give it the appearance of fabric, stone, or leather in a warm colour. You can also use faux paint on just a portion of the wall, such as the lower half to add gravity and draw the eye downward.

Bring Your Walls Down

Using paint to create a visual effect that lowers the height of your walls is a great way to polish and perfect an interior scheme. If you have a home whose furnishings are out of keeping with the height of the walls, consider using paint in any of these ways to get them down to size. Talk to your paint contractor about this and ask for their suggestions. They probably painted hundreds of tall walls and have seen different approaches that designers and homeowners used.

Tips for choosing room colours, by Sarabeth Asaff .

Colour For Tall Walls posted first on your-t1-blog-url

Lighting And Colour

Lighting and Colour when Decorating a Home.

Natural or artificial light will affect the colour and the final look of freshly painted homes.
Colour in a space should not be chosen until the volume of lighting is examined. Where the light comes from makes a big difference. Natural light from a big south facing window is not the same as light from a small light bulb. Furthermore, a light fixture is more important than it’s main function of lighting up a space. It is one of the important elements that needs to look good in a decorated space.

When planning a project, a designer will consider issues such as energy efficiency and cost. A colour consultant will have other questions:

• What is the purpose of lighting in the space?
• Can existing light be used to highlight important decorating elements?
• Can colour be used to brighten up a room without changing any lighting?
• Is painting a large surface like a ceiling solve other lighting problems?
• Will a smart colour choice turn a previously plain wall into a focus wall?

The important thing to remember is that light itself is not visible. It helps us see other things. In the case of interior decorating, it helps us see things differently. In the last few years our painters must have painted hundreds of rooms in homes in Benjamin Moore’s “Chantilly Lace”. This is a very bright white that can instantly brighten up a space.

How to Choose Colour when faced with Different Lighting Situations

After spending hours, driving from paint store to paint store, sorting through hundreds of colour chips, you have finally made your choice. The paint is mixed and you are now ready to paint. You apply the colour, only to find out it is not the same as it was on that colour swatch in the paint store. Before you go back to the store and complain to the clerk, the culprit may be the light that your room is receiving.

• South facing rooms receive the most natural light. Walls across the windows can be painted with darker colours. Dark colour will absorb more light and can be used to dull the effect of a very bright room. For the same reason, a light colour can look almost white. It may be a good idea to use a shade darker than the intended colour.

• North facing rooms receive considerably less light. Using lighter and warmer colours will compensate for that. White can look grey, especially on the window walls. Using a creamier white can help “warm it up”. If a darker colour has to be used, it will have less of an effect when used on a window wall.
• A room facing east will look brighter during the day when it gets a lot of sunlight.
• A west facing room will look dull in the morning but warm and bright in the afternoon.
• The architecture of a home, will affect the influence natural light has on colour. A bright, open space home can take advantage of the effect that natural lighting has on a colour scheme. At the same time, smaller homes with small windows will rely more on artificial lighting.
• Different types of artificial lighting have a different colours and their interaction with the painted walls have to be carefully considered. Incandescent lights have a warmer yellow effect. Fluorescent light produces a slightly blue colour. Halogen lighting is the closest to natural and it looks white.

After narrowing your choice to two or three colours, it’s a good idea to buy a litre of each colour and paint some “test patches” in the areas that they will be used in. Test areas should be on two or three walls in each room for a more real representation of the final result. Make sure to check these colours during different times if you light source is a window. Your painting contractor should be able to provide sample service for a nominal charge.

To engage the services of a Colour Consultant in the Greater Toronto Area book a consultation with Ecopainting and we will connect you to an expert.

Lighting And Colour posted first on your-t1-blog-url

Colour Psychology

The Psychology of Colour (as told by your Painter)

It might be too much to ask house painters to know about colour and colour psychology. Yet we deal with colour daily. We sample it, buy it, apply it, cover it, change it, and depending on the customer, answer for it! We don’t need a psychology degree, but we witness the psychological effects a colour change can have.

When describing a colour, a colour consultant might use such terms as “sophisticated”, “soothing”, “happy”. At the very least the terms “warm” or “cool” will be used when describing a colour for a home or room. The reason we use designers or colour consultants is because we trust their knowledge. They studied the theory and psychology of colour. They can tell us what colour works with that big sofa, or what to do with that ugly bathroom. When it’s time to sell a home, they know how to create favourable first impressions. In a work space the right colour can increase productivity and employee morale.

Our perception of color is influenced by our personal associations. Colours are seen as warm or cool mainly because of those associations. Yellow and orange are associated with heat and fire. The sea, forests and trees make us feel cool. When grey skies and rain surround us, we tend to draw in. Bright blue skies, a colourful garden, flowers and green forests have the opposite effect.

There is a lot of scientific research recognizing that there is a distinct relationship between colour, mood and behaviour.

The following facts demonstrate the psychological effects of colour.

• People actually gamble more and make riskier bets when under a red light as opposed to a blue light. That’s why Las Vegas is the city of red neon.
• A recent survey in England found that red is the least favourite of colours for front doors. It suggested that if you are selling your house, a green door will help sell it faster.
• London England’s Blackfriar bridge reduced its suicides by 33% when it was painted from black to green.
• It is found that women were more likely than men to have a favourite colour. The same study found women to prefer soft colours while men prefer bright ones.

Cultural Influences, beliefs and Upbringing Have an Effect on the Way We See Colour.

In most Asian cultures, yellow is the imperial colour and has very similar cultural associations as purple has in the western world. In China, red is associated with luck and prosperity. White in China is symbolic of death and mourning.

In Europe colours are strongly associated with political parties and social movements. Blue is mostly synonymous with conservatism, black with anarchism and red with socialism.

Green has always been used by organizations and groups concerned with the state of the environment because of its abundance in nature and its association with it.

At times of political and economic uncertainty, the safe comforting colours like beiges and browns are more popular. At times of rampant optimism, bright greens, aquas, even yellow greens are the colours of choice.

Colour marketing groups are able to capture the mood of the consumer and capitalize on it by directing their members marketing campaigns based on their findings. The popular colours of today are usually the forecast colours of a few years ago.

Colour Psychology posted first on your-t1-blog-url